Site Search
Latest Topics
[SAN Storage] Multipath Software for P5 VIO
Multipathing/failover software support on the VIOS:
AIX Multipath I/O (MPIO)
IBM TotalStorage Multipath Subsystem Device Driver (SDD v1608) for ESS and SVC
IBM TotalStorage Multipath Subsystem Device Driver (SDDPCM v2108) for ESS and SVC
RDAC
PowerPath (EMC)
HDLM (HDS)
[AIX]How to setup to enable syslog in AIX?
syslog is one of the best logging utilities,The errpt logging is enabled by default in AIX. To enable syslog, /etc/syslog.conf file must be modified, here are the steps:
1. append follow in syslog.conf file:
*.debug /usr/syslog.log
*.info /usr/syslog.log
[AIX.DMX]How to configure AIX devices after symm(device) configuration change?
In situations below, the disk devices will require re-configuration:
1. Converting SRDF from/to Non-SRDF device
2. Due to host failure or planned maintenance, RDF1 (R1) and RDF2 (R2) are swapped
3. Symmetrix FA ports attached to the host have sc3/sc2 bit set
More Articles...
- [AIX] How to match AIX Hdisk number to Clariion Array LUN number?
- [AIX]Why there are ghost LUNs(LUNz) presented to host?
- [AIX]Difference between AIX Maintenance Level(ML), Technology Level(TL) and Service Pack
- [AIX] How to increase the size of a logical volume?
- [AIX] How to create a logical volume?
- [AIX] How to increase /reduce a paging space?
- [AIX] How to remove a file system?
- [AIX]How to defragment a file system?
- [AIX] How to mount a CD/DVD?
- [AIX] How to change the size of a file system?
- [AIX] How to create a file system?
- [AIX] How to change between kernel modes in AIX?
- [AIX]How to find out what kernel mode AIX is running at?
- [AIX]How to Displaying program output and copying to a file (tee command)
- [AIX]How to resolve LED 581 issue during system bootup?
Page 1 of 21