Site Search
Latest Topics
You are here:
[AIX]How to setup to enable syslog in AIX?
syslog is one of the best logging utilities,The errpt logging is enabled by default in AIX. To enable syslog, /etc/syslog.conf file must be modified, here are the steps:
1. append follow in syslog.conf file:
*.debug /usr/syslog.log
*.info /usr/syslog.log
[IBM SVC]IBM SVC Restrictions - 5.1.x
DS4000 Maintenance
Host Limitations
SAN Fibre Networks
SAN Routers and Fibre Channel Extenders
SAN Maintenance
SAN Volume Controller Software Upgrade
Maximum Configurations
More Articles...
- [IBM SVC]IBM SVC Restrictions - 4.3.x
- [SAN Storage] Complete Organization WWN Registration List - Part 4
- [SAN Storage] Complete Organization WWN Registration List - Part 3
- [SAN Storage] Complete Organization WWN Registration List - Part 2
- [SAN Storage] Complete Organization WWN Registration List - Part 1
- [SAN Storage] UNIX/LINUX OS Disk Management
- [IBM Storage] Identify IBM Storage by WWPN
- [IBM] Default IBM Hardware Access ID and Password
- [IBM DS] Loops and switches on the DS6000 and DS8000
- [IBM DS] DS8000 Terms and Concepts
- [IBM TPC] HW/SW Requirement for Implement TPC for Replication
- [IBM SVC] How to run performance review using SVC CLI Scripts
- [IBM Storage] SDD/SDDPCM multipath limitations and recommendations for AIX
- [SAN HPUX]How to setup host connectivity for HPUX 11iV3 that connects to Clariion without Powerpath
- [SAN-HPUX] How to find out the CLARiiON LUN number based on the HPUX host device output?
- [Brocade]How can I tell if a Brocade switch has Core PID set?
- [Brocade]Upgrade Firmware on Silkworm switchs
- [Brocade] How to save the supportshow output?
- [Brocade] Understand Fibre Channel logins
- [Brocade]Gracefully shut down Brocade switches and directors
- [Brocade] SAN Zoning - Guideline and considerations
- [Brocade] SAN Zoning - CLI
- [Brocade] Default HP HW Access ID and Password
- [Brocade]How to find out the model Brocade Switch from a Switchshow/Supportshow?
- [Brocade] Brocade CLI Command
- [Brocade] Setup console session brocade switch(serial connect)
- [Brocade] Troubleshooting - Switch Port shown wrong mode
- [Brocade] Troubleshooting - Marginal Links
- [Brocade] Default Brocade Access ID and Password
- [Brocade] SAN Zoning - Zoning Architecture
- [NETAPPS]How to check aggregates status using CLI to find out the spare disks?
- [NETAPP]How to find out aggregates total space and available space ?
- [NETAPP]How to Zero disk spare ?
- [NETAPP] How to Add more disk to existing Aggregation ?
- [NETAPP]What is the process of creating Volume using CLI ?
- [NETAPP]How to to change Aggregation Raid Type ?
- [NETAPP] How to increase FlexVol Volume size
- [NETAPP]How to reclaim a FlexVol Volume and destroy aggregate
- [Clariion] How to restart Navisphere Agent on Host side?
- [Clariion]How to reset Navisphere password
- [Clariion]How to Setup Host connectivity for Linux Host
- [Clariion]What is procedure after HBA replaced?
- [DMX/Clariion]How to add additional path(powerpath) to a powerpath devices?
- [Clariion]SANVIEW CPL(Clone Private LUN) requirement and how to?
- [EMC Clariion]What need to be considered before Snapview clone fracture?
- [EMC Clariion]How to Ensure consistent fracture of clones?
- [EMC Clariion]Why is running FSCK &CHKDSK required when creating a SnapView clone?
- [Clariion] Snapview Clone operation - Part One
- [Clariion]Clariion SP Error Code Explained - Part Two- SOFT CODES
- [Clariion] Snapview Clone operation - Part Two
Page 9 of 47
Login
Custom Search
Copyright 2010(c), Innovite Consulting Inc.( Devision of SynergyGear Tech)